Kana Dynamic IP Updater

www.opendns.com

Copy and paste the following line into a text file. See also this faq for information on how to use the configuration file.

www.opendns.com

# This is configuration file for OpenDNS:
# http://www.opendns.com/
# 
# -------------------------------------------
#             INSTALLATION:
#STEP 1:
#
#Install DynDNS Updater and choose all the default choices. After installation,
#do not choose to start the program. If it does start, exit the program completely.
#This is easily done by right clicking the checkmark icon on the taskbar and clicking
#on exit.
#
#STEP 2:
#
#Go to the location DynDNS updater was installed. This is most likely
# "C:\Program Files\DynDNS Updater\" Edit the DynDNS.ini file and add these lines:
#
#[Options]
#
#IsDynDNS=0
#
#[SvcProvider]
#
#1="dyndns.org"
#2="opendns.com"
#
#If a section already exists, for example [Options], just add the lines that are
#missing.
#
#If a SvcProvider already exists with a number 2, then use the next unused number (eg. 3)
#
#In this same directory create another file called Profile_OpenDNS.ini that contains
#the file you are now reading
#
#STEP 3:
#
#Once this is completed open the DynDNS updater program.
#
#Follow the setup wizard until you are asked to create a group.
#
#Name the group 'OpenDNS'.
#
#On the following screen enter your OpenDNS username and password and click on 'Add'
#Create an entry that matches your network label as shown and click 'OK'.
#
#Note: The hostname must match the label given to your dynamic IP network and DynDNS
#updater requires the hostname to be a proper fully qualified domain name, hence the
#network label and the hostname should be something like: mynetwork.opendns.com, it
#does not have to be an opendns.com domain. If you have a domain name you would like
#to use, feel free to do so.
#
#Once the entry is created go to the 'Options' tab. Change the Provider to
#OpenDNS and point Profile to the OpenDNS.ini file created earlier.
#Click 'Ok' to close all remaing setup screens and complete the configuration.
#
# --------------------------------------------

[default]
withpass=1
host=updates.opendns.com
port=443
path=/nic/update
protocol=https

[requests]
hostname=%HOST%
username=%USER%
password=%PASS%
myip=%IP%

[result]
multilines=0
success=good
success=nochg
warning=abuse
warning=!yours
warning=nohost
  • Email this page
  • Print this page
  • A  A  A
  • Back to top
  • Last updated: Sunday, December 26, 2010 9:03 pm
Printed:
Beta
You can get this information from:
https://kanasolution.com/products/dyndns-updater/dyndns-providers/provider/pid/21/
Close this window
Email This Information
To send the message, please fill the form below
Email To
Subject
Message
Your Email
Validation

Please enter the text on the following image in the verification box below. Click here if you cannot read the text. All alphabets are in upper case.

Verification image